iOS 10.3.3 Jailbreak

Following Jailbreak solutions available for iOS 10.3.3. Almost all jailbreak tools install Cydia.


1) Anzhuang - You can install popular Jailbreak apps including Cydia to iOS 10.3.3 devices using Anzhuang developer code extraction method.It is a straightforward online Jailbreaking solution for iOS 10.3.3.


2) DoubleH3lix - Tihmstar recently released H3lix jailbreak tool version named as DoubleH3lix jailbreak with siguza. It supported to jailbreak all the 64-bit devices running iOS 10 versions up to 10.3.3 version as Semi-untethered.


3) Meridian jailbreak - Sparkey also known as iBSparkes on Twitter has released Meridian jailbreak tool for iOS 10.3.3 running 64-bit devices.


4) g0blin jailbreak - g0blin is semi-tethered jailbreak tool for iOS 10.3.3 running 64-bit devices. g0blin also support to iOS 10.3, iOS 10.3.1 and iOS 10.3.2 jailbreak.



5) Velonzy - Velonzy is a jailbreak app installer for iOS 10.3.3 version. Both online and Windows/Mac computer based method available to download velonzy.



6) h3lix - H3lix released as semi-untethered jailbreak for iOS 10.3.3 running all 32-bit devices. This is supported to jailbreak all the iOS 10 versions too.




1) Anzhuang

Anzhuang iOS 10.3.3 Jailbreak app installer is not available at Apple App Store or any website. You must use the zJailbreak app store or Xabsi app store to download it .


As well Anzhuang supports to install jailbreak apps for all latest iOS versions such as iOS 11.3.1, iOS 11.3, iOS 11.2.6 & iOS 11.2.5 including iOS 11.4 beta too.








Step guide

Step 01 - Install zJailbreak or Xabsi from the above buttons. You just need to enter your device passcode during the installation process of zJailbreak or Xabsi.


Step 02 - Open the installed App store (zJailbreak or Xabsi). Install Anzhuang which is available in jailbreak category.



Step 03 - Now click “Browse the Jailbreak app list” to select an iOS 10.3.3 Jailbreak App.



Step 04 - OK, Select the Jailbreak app from list, tap the generate code, Then copy the code.



Step 05 - Open Pangu Anzhuang and paste the code. App will download automatically.



How to Trust the Application

When you open Enterprise App first time, you will receive the message to trust it. Follow the given below instructions to trust the application.


Step 01 - Dismiss the Untrusted Enterprise Developer popup message.




Step 02 - Go to Settings > General > Profile and Device management.




Step 03 - Trust the app.




2) DoubleH3lix Jailbreak

Tihmstar recently released DoubleH3lix jailbreak tool to jailbreak 64-bit devices running all the iOS 10 versions up to iOS 10.3.3 as Semi-untethered. Previously, tihmstar released H3lix jailbreak supported only for 32-bit devices. Both tihmstar’s H3lix jailbreak based on Siguza’s v0rtex exploit.





Before start the iOS 10.3.3 jailbreak, follow the below instructions.

Prerequisites :
  • Backup all your data to iTunes or iCloud before the jailbreak.

  • Turn off Find my iPhone during the jailbreak process.

  • Turn off passcode/Touch ID while the jailbreak process.


Step Guide of DoubleH3lix jailbreak


Step 01 - Download the DoubleH3lix IPA and Cydia impactor using following buttons. Make sure to download Cydia Impactor according to your Computer OS.




Step 02 - Connect your iOS 10.3.3 device to the computer. Open the Cydia Impactor. Select your device from the drop-down menu.


Step 03 - Drag the DoubleH3lix IPA into the Cydia Impactor tool.


Step 04 - Now enter your Apple ID & password. Then, it will start to install DoubleH3lix app on your device.


Step 05 - Once the installation is done, DoubleH3lix app will be available on your device homescreen. Before open the app you need to trust the developer profile. General --- > Settings --- > Profiles & Device Management --- > Trust the Enterprise App.


Step 06 - Now go back to homescreen and open the h3lix app. Then tap on “Jailbreak” Button.


Step 07 - Wait until complete the jailbreak process. Finally, it will install Cydia on your iOS 10.3.3 device.


Note - Because of DoubleH3lix tool is a Semi-untethered tool, you have to re-jailbreak your device after every reboot.


3) Meridian jailbreak

Sparkey is the developer of the Meridian jailbreak tool. At this time Meridian supports iOS 10 to iOS 10.3.3 running any 64-bit devices.


Please note :- We tested Meridian jailbreak and Still Cydia not stable. So we recommended for stable release.


Device compatibility for Meridian jailbreak

iPhone 7 & 7 Plus

iPhone 6S & Plus

iPhone 6 & 6 Plus

iPhone SE

iPhone 5S

iPad Air 1 and iPad Air 2

iPad

iPad Mini 2, iPad mini 3, and iPad mini 4

iPad Pro 1 and iPad Pro 2

iPod Touch 6th Gen


Meridian does not support for iPhone x jailbreak. Read more about iPhone x jailbreak.


Meridian jailbreak requirements

This tool is still not stable and recommended to backup device data for safer.


Meridian Jailbreak Step Guide

Step 01 - Download Meridian IPA and save it to desktop.



Step 02 - Download Cydia Impactor. Make sure to download according to your computer operating system.


Step 03 - Open Cydia Impactor and select the IPA and drop it into Cydia Impactor.



Step 04 - Enter Apple ID details to start IPA sideload process.


Step 05 - Wait for sideload complete message.


Step 06 - Once complete, go to Settings > General > Profile and Device management and trust the app.


Step 07 - Open the app and tap go button.



Step 08 - Wait for the reboot the device.


Step 09 - Check homescreen for Cydia. Cydia still not stable wait for the Saurik update.



4) g0blin Jailbreak

g0blin Jailbreak is still in beta status, and It's not stable at this time. We recommend to waiting some time until developers release the public version. Cydia may not be work with iOS 10.3.3 at this time.


The g0blin jailbreak tool developed by Sticktron and Jake James and this tool based on Siguza kernel exploit. This tool only supports iOS 10.3 to iOS 10.3.3 running 64-bit devices and 32-bit users can use h3lix jailbreak tool.



Requirements before start jailbreak

  • g0blin is still not stable, so we recommended to backup before start the jailbreak.


Compatible devices for g0blin

iPhone 5S /iPhone 6/6 Plus /iPhone 6S/6S Plus /iPhone SE.

iPad Mini 3 /iPad Mini 4 /iPad Air 2 /iPad Pro 12.9-inch 1st generation (only 10.3.3)


Step Guide to install g0blin iOS 10.3.3 - 10.3 Jailbreak

Step 01 - Download g0blin jailbreak IPA.



Step 02 - Download Cydia impactor.



Step 03 - Connect your iOS device to Computer.


Step 04 - Launch Cydia Impactor and drag and drop g0blin jailbreak IPA to Cydia Impactor to start sideloading.



Step 05 - Cydia Impactor now requires your Apple ID details and submit the details.



Step 06 - Wait for sideloading complete and once complete it you will have g0blin app on your device home screen.


Step 07 - Now you can disconnect the device from the computer.


Step 08 - You cannot launch the app until trust the ap. Go to Settings > General > Profiles & Device Management and trust the app.


Step 09 - Launch the g0blin app and tap jailbreak button.



Step 10 - Wait for the already jailbroken message.



Step 11 - Now you should see Cydia on your homescreen.



Note - You should use g0blin jailbreak respring instead of Cydia respring.


5) Velonzy

Velonzy is a new method to install Jailbreak apps for iOS 10.3.3. Velonzy makes you as a virtual Apple developer and allows you to install the Jailbreak apps to your iOS 10.3.3 device very easily.





Velonzy is a donateware. Normally, you must donate to the Velonzy team to get their service. However, Pangu8 team donated them and they provide free service to install Velonzy to your iOS 10.3.3 devices. It is available two methods as follow to install Velonzy. Recommend to use both methods to install more apps to your device.


Velonzy Online method

Step 01 - Click here to get free Velonzy access.


Step 02 - Then, tap the "Register UDID" button.



Step 03 - It will be redirected to the UDID Submitter initiation menu. Then, provide your device passcode to continue. However, nothing will be installed on your device at this point.


Step 04 - The UDID will be submitted the Velonzy database, after the installation.


Step 05 - Finally, you can install the Velonzy Online Jailbreak app installer to your device.


Step 06 - Now, Browse the jailbreak app categories from the Velonzy iOS app list. Select any jailbreak app and generate the developer code of the selected app. Paste the copied code into Velonzy app.


Step 07 - You can install any number of jailbreak app using this method. Also, you can only install Cydia with Velonzy Online method.



Velonzy PC method

Follow the given bellow step guide to install Jailbreak apps for iOS 10.3.3 device using Velonzy PC method.


Step 01 - Get Velonzy free access from following button.



Step 02 - Click the Register UDID button now.


Step 03 - Download Velonzy from following buttons according to your computer OS.






Step 04 - Go to the Velonzy jailbreak IPA list and provide the UDID of your device. Then it will download the jailbreak iPA to your computer.



Step 05 - Open the Velonzy app installer. Then drag the jailbreak IPA into the app installer.



Step 06 - It will ask your Apple ID and the Password. Then it will install jailbreak apps to your device.


Step 07 - Before open the jailbreak apps, just trust the developer of the app.



6)H3lix Jailbreak

The h3lix jailbreak released to jailbreak iOS 10.3.3 to iOS 10 by tihmstar in collaboration with Siguza as Xmas gift. h3lix compatible with all 32-bit devices and its reject the 64-bit devices. 64-bit device users can use above jailbreak alternative methods. H3lix is Semi-untethered jailbreak and based on Siguza’s v0rtex exploit.


Please follow the below instructions before start the iOS 10.3.3 jailbreak.




Prerequisites :
  • Make sure to backup all your data to iTunes or iCloud before the jailbreak.

  • You should turn off Find my iPhone during the jailbreak process.

  • You should turn off passcode/Touch ID while the jailbreak process.


Installation Step Guide to install h3lix

Step 01 - Download the h3lix IPA and Cydia impactor from following buttons.





Step 02 - Connect your device to the computer. Open the Cydia Impactor. Select your device from the drop-down menu.


Step 03 - Drag the h3lix IPA into the Cydia Impactor tool. (If you get warning appears, click ‘OK’.)



Step 04 - Now you will be asked to enter your Apple ID & password. Enter your Apple ID & password. Then h3lix app will start to install on your device.



Step 05 - Once the installation is done, h3lix app will be available on your device homescreen. Before open the app you need to trust the developer profile.


General --- > Settings --- > Profiles & Device Management --- > Trust the Enterprise App.


Step 06 - Now go back to homescreen and open the h3lix app. Then tap on “Jailbreak” Button.




Step 07 - It will take few minutes to complete the jailbreak process, and finally Cydia icon will appear on your device homescreen.




Note - If there is no Cydia, please repeat the jailbreak process until it success.


When you reboot your device, all the jailbreak features will be disabled because of the Semi-untethered jailbreak. To fix this, re jailbreak the device.


Other Jailbreak Methods

There are other jailbreak methods available for these versions. C0F3 Jailbreak is another jailbreak method and Pangu8 Jailbreak Installer was most popular jailbreak alternative method for iOS 10.3.3.


C0F3 Jailbreak

C0F3 tool released to jailbreak iOS 10.3.3 to iOS 10 versions as well as iOS 11.1.2 to iOS 11. C0F3 (Cofee) released by Joseph Shenton with the support of Sem Voigtlander, Vincent Desmurs, Jake James, Omar Tawfik, Mason Shmadul and CoolStarORG. C0F3 compatible with all 64-bit devices and 32-bit support coming soon. C0F3 jailbreak based on v0rtex exploit,async_wake exploit and kppless exploit and C0F3 team modified these existing exploits.


C0F3 Devices Compatibility

iPhone : - iPhone X, iPhone 8, iPhone 8 Plus, Phone 7 & 7 Plus, iPhone 6S & 6S Plus, iPhone 6 & 6 Plus, iPhone SE, iPhone 5S.


iPad : - iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro.


iPod : - iPod Touch 6G.


C0F3 iOS Versions Compatibility

iOS 10.3.3 to iOS 10
iOS 11.1.2 to iOS 11


How to install C0F3 Jailbreak

C0F3 jailbreak currently highly recommend to only for developers, and they can report the issues directly to the C0F3 team. This will help you to get more stable jailbreak. Follow the given below instructions if you are still interested.


Step Guide

Step 01 - Download the C0F3 IPA file from following install button.




Step 02 - Click following install button to Download Cydia Impactor.



Step 03 - Connect your iPhone / iPad to the computer using a USB cable.


Step 04 - Open Cydia Impactor and drag IPA file into the Cydia Impactor.



Step 05 - Enter your Apple ID and password when it needed.


Step 06 - Then C0F3 jailbreak app will be installed on your iPhone / iPad. Once done, C0F3 app will appear on your homescreen.


Step 07 - You should trust the developer profile before launching the app.


Go to “Settings” --> “General” ---> “Profiles & Device Management” ---> trust.


Step 08 - Now launch the C0F3 app from your device homescreen.


Step 09 - Tap on “Allow” button to start the jailbreak.


Step 10 - After few minutes, you can see the Cydia on your device homescreen.


Pangu8 Jailbreak Installer

We have discontinued Pangu8 JB installer. This tool has been using Velonzy database to register UDID. Now Velonzy team is no longer supporting us to access to their database.


We are sorry for the inconvenience.


Download the Pangu iOS 10.3.3 Jailbreak app installer from the following button for Windows computer.


Please visit this page from your PC/Mac to download.





please note :- This tool doesn't Jailbreak your device to install the Cydia. It only installs most popular Jailbreak apps to your iPhone, iPad or iPod.




Step Guide to Install Jailbreak apps for iOS 10.3.3

Compatible device list- all iOS 10.3.3 devices.

Step 01 - Install the Pangu JB app installer from above button and Cydia Impactor.



Step 02 - Connect your device to your computer.Download the IPA file which signed from your UDID code.

How to sign iOS 10.3.3 Jailbreak apps from your UDID..


Step 03 - Click the Cydia Impactor button of the Pangu8 Jailbreak installer.




Step 04 - Then Drag and drop the downloaded IPA file of the Jailbreak app.



(You have to log out from your default iTunes account and log in the new account when you installing the Jailbreak apps).


Step 05 - Now you must Login to the Cydia Impactor using Your iTunes account. It is better if you can create a separate iTunes account to install Jailbreak apps to iOS 10.3.3.

Step 06 - It takes about a minute to install Jailbreak app to your device.


Step 07 - OK, Now go to Settings, General and Profile and Device Management on your iTunes account.

Then you can see your iTunes account ID as the developer of this iOS 10.3.3 Jailbreak app.



Sign and Download IPAs of JB apps.

We have categorized some most popular Jailbreak applications of this page.


please Note - You must sign these IPA's from your UDID code before downloading them. You can only install Jailbreak apps for iOS 10.3.3 developer beta version only.


First of all, You must get your UDID code.

01 - Connect your device to the computer.


02 - Now open iTunes and click twice as image shown.


03 - Then Copy the UDID code.




Jailbreak Scams

Spring Jailbreak

iOS Security Researcher & Cydia developer, DevelopApple has released Spring jailbreak for all the 64-bit devices running iOS 10.3 to iOS 10.3.3 versions. Method was found using Siguza’s v0rtex exploit, qwertyuiop’s yalu102 kpp bypass and the Xerub’s patchfinder. According to the developer, it can jailbreak all the A7 to A9 devices using the latest Spring beta 2 IPA to install Cydia. However, there was nothing to install.



Compatible devices -

All the A7 to A9 devices (64-bit devices only)

iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone SE

iPad (5th generation), iPad Pro (12.9-inch), iPad Pro (9.7-inch)

iPad Air, iPad Air 2, iPad mini 4, iPad mini 3, iPad mini 2

iPod touch (6th generation)


Compatible Versions - iOS 10.3.3, iOS 10.3.2, iOS 10.3.1, iOS 10.3


Note - We tested Spring jailbreak using above few devices running iOS 10.3.3 and iOS 10.3.1 versions. Jailbreak process was failed for almost all tested devices. Here is the tested step guide. However, we highly recommended not to use below guide. Because Spring Jailbreak is totally fake.


Step Guide of Spring Jailbreak

Step 01 - Download Spring IPA using following button.



Step 02 - Download the Cydia Impactor tool using following button. Make sure to download it according to your computer OS.


Step 03 - Connect your device with the PC or Mac and open the Cydia Impactor tool.


Step 04 - Provide your Apple ID details now. Then it will be available Spring app on your device homescreen.


Step 05 - Trust the certificate of Spring App. Open Settings ---> General ---> Profiles & Device Management. Trust the app now.


Step 06 - Run the the Spring App, which installed on your device. Then tap the jailbreak button.


Step 07 - Normally, It will take few minutes to complete the jailbreak process in here to install Cydia. However, Spring Jailbreak was failed to complete the jailbreak process. There were many errors. Therefore highly recommend to avoid this fake jailbreak.


WWDC

Worldwide Developers Conference, known as WWDC is a technical conference organizing by Apple to introduce their new software’s and technologies to software developers. WWDC held annually in California and commenced in 1983 in Monterey, California. The participant can test some of these products in hands-on labs with Apple engineers.

Apple announced its 29th Annual Worldwide Developers Conference WWDC would be held at the McEnery Convention Center in San Jose, California from 4th- 8th June 2018 and iOS 12 will be previewed at this time.




Jailbreak iOS 11.2.5

Apple released iOS 11.2.5 version after testing & developing it through 7 beta versions. It is compatible two jailbreak app installer method for this version. One is Pangu Anzhuang app installer. Other is Velonzy app installer. Both of these method allow to install jailbreak apps to iOS 11.2.5 version.




Keen Jailbreak

Keen team demonstrated iOS 11.1.1 jailbreak possibility at PoC 2017. Previously they proved the iOS 11 and iOS 10.3.2 jailbreak at MOSEC 2017. Still, there is no any public tool releases, and they did it privately.




Houdini Semi Jailbreak

Houdini, Semi Jailbreak method has been released for iOS 11.1.2 to iOS 11 and iOS 10.3.2 to 10. You can install the Houdini using Cydia impactor or zJailbreak online app store. Houdini allows you to install Jailbreak themes and tweaks for your iPhone or iPad.




Saigon Jailbreak

Now it is possible to jailbreak iOS 10.2.1 with Saigon tool. However, Saigon jailbreak tool supports to jailbreak 64-bit devices only. 32-bit device users have to try alternative jailbreak solution to install third party apps. zJailbreak is the best solution for 32-bit users.




Anzhuang

Anzhuang is a straightforward method to install Jailbreak apps from iOS 10.2 onwards. You can install Cydia and much more jailbreak apps for these iOS versions using this hacking app. This will allow you to install apps with developer code extraction methods. No Computer required to Install the Pangu Anzhuang.




Triple Fetch Exploit

Ian Beer, A New hacker exploited iOS 10.3.2. It is a good sign for upcoming Untethered or Semi-tethered Jailbreak for iOS 10.3.3. However, Anzhuang and zJailbreak is only Jailbreak alternative methods for iOS 10.3.3.
Read more about Triple Fetch Exploit.




iPhone 7 Jailbreak

iOS 10.3.3 Jailbreak Anzhuang is compatible with all iPhone , iPod and iPad models. Even this online tool compatible with iPhone 7 and iPhone 7 models. Still, no GUI based tool is avoidable for iPhone 7 iOS 10.3.3




Extra_recipe+yaluX

Luca Todesco released extra_recipe+yaluX for iOS 10 - 10.1.1 stable jailbreak So download extra_recipe+yaluX and get the stable jailbreak for your iPhone 7 / 7+ devices. Visit Yalu jailbreak page for download Yalu new method.




zJailbreak

zJailbreak is the alternative jailbreak solution for all latest iOS versions. Also, zJailbreak is must have application for latest iOS releases because of several reasons. Now you can install zJailbreak with us or zJailbreak official page.






Privacy Policy | Terms of Service | About us | Disclaimer | Contact us

Copyright © 2018 by Pangu8.com