PP Jailbreak’s most recent jailbreak release for iOS 10.0-10.2. As well previously they released the jailbreak tool for iOS 9.2-9.3.3. Their very first Jailbreak tool was for iOS 8.0 – 8.4 for mac users in collaboration with PanguTeam and PPJailbreak.
iOS 11 jailbreak is the biggest challenge in the Jailbreak community. The recently keen team demonstrated about iOS 11 jailbreak using beta 2 and iOS 10.3.2. However, there is no any confirmation about the official release. Perhaps PanguTeam + PP Jailbreak combination will release jailbreak tool for iOS 11 & higher version with the experience from previous versions.
It has Chinese tool release experience for latest releases.
Chinese tool version can be used rest of Chinese users according to their easy guide.
Last major iOS releases (iOS 8.X / iOS 9.X / iOS 10.X ) were available PP Helper Jailbreak.
Latest release as Chinese tool. (Seems targeted only chinese peoples.)
Not attend latest releases of iOS (No any attempt after iOS 10.2 jailbreak)
Apple is paying higher amount for bugs reporting than jailbreak.
PP helper team released iOS 10 - iOS 10.2 jailbreak tool for Chinese users. Recommended Yalu102 jailbreak tool for English users as both guides are same.
iPhone - iPhone 6S / iPhone 6S Plus / iPhone SE / iPhone in 6 / iPhone in 6 Plus / iPhone 5S
iPad - iPad Pro (12.9) / iPad Pro (9.7) / iPad air / iPad Air 2 /iPad mini 2 / iPad mini 3 / iPad mini 4
iPod - iPod touch (6G) /
Backup device data - Recomended to use iTunes backup method.
Do not install this tool if your device model not listed on above support device list.
You must run the latest iTunes version otherwise update it now.
Turn off find my iPhone feature and make sure to turn on it after complete the process.
Turn off Touch ID and reguler passcode. you can turn on it after jailbreak process complete.
Step 01 - Plug your device to PC and Run PP jailbreak tool.
Step 02 - Tap Jailbreak Start button as picture shown.
Step 03 - Enter Captcha when PP required
Step 04 - Now you successfully installed PP app on your homescreen.
Step 05 - Go to settings and trust PP app - Settings > General > Profile and Device management > Tap trust for PP jailbreak certificate.
Step 06 - Now again visit to device homescreen and Tap PP app.
Step 07 - Wait until jailbreak process complete & After few minutes device will restart.
Step 08 - Once restart done go to homescreen for Cydia.
iOS 9.2 - iOS 9.3.3 Jailbreak was available with Chinese language & English Language for Windows users only. This released as PP jailbreak and Pangu combined tool. We recommend to refer our iOS 9.3.3 jailbreak guide to complete the jailbreak process. Unfortunately, PPHelper was not compatible with the iOS 9.3.4 & iOS 9.3.5 versions.
Use following button to download the tool.
PP jailbreak 2 tool supports for both Mac and Windows computers. Both of these versions are compatible with iOS 8.1.3 , 8.2 , 8.3 and iOS 8.4 Jailbreak. PP jailbreak 2 tool is only available from the Chinese language, You cannot get it from English or another language.However we do not recommend to PP Jailbreak for Windows users. Windows users can use the TaiG tool to jailbreak iOS 8.1.3 , 8.2, 8.3 & 8.4. But Mac users must use the PP jailbreak tool for iOS 8.1.3 - 8.4.
We recommend to refer the following gudies before start the Jailbreak with PPJailbreak tools.
iPhone - iPhone 6 Plus, iPhone 6, iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S
iPad - iPad Air 2, iPad Air, iPad Mini 3, iPad Mini with retina (iPad Mini 2), iPad Mini, iPad 4, iPad 3, iPad 2
iPod - iPod touch 6 and iPod Touch 5
Open the PP jailbreak tool and plug your device to the computer, Please open the iTunes to verify your device is connected to the computer, Otherwise disconnect your device and reconnect it to the computer. Click to uncheck PP tool (highlighted Chinese text on following picture) to prevent to install unnecessary applications and click the box which is appeared on the middle.
step 01 : Disable find my iPhone now / turn on Airplane mode now / disable Touch ID and passwords.
step 02 : Then click the big black and white button, It takes some time to complete the jailbreak process. Don't touch your device among the jailbreak process. Now you can see Device appearing "Restore in Progress" Wait until device reboot.
step 03 : Once reboot go through Setup process and setup the Device.
step 04 : After the complete setup process, you can see Cydia icon on your Device.
step 01 : Make sure to install and have iTunes latest version.
step 02 : Disable Touch ID / Device Passcodes. Remove Find my iPhone access and can enable it after complete the process. Enable Airplane mode now.
step 03 : Plug your Device to Mac with USB cable.
step 04 : Download PP 2 Dmg file to Mac from above link.
step 05 : Open the PP 2 Dmg file. Drag the PP Jailbreak application into the Application folder and confirm it.
step 06 : Using same popup window, open PP Jailbreak application.
step 07 : Uncheck install PP helper option to prevent unwanted files and click jailbreak button.
step 08 : Now “read me first” popup window will come up and read carefully whether you have done all the steps. If it is OK, Click continue for go to next step.
step 09 : Now PP 2 will begin the jailbreak process. During the jailbreak process it will appear message to set up the device. Do it for next step.
step 10 : When it complete the jailbreak successfully, device will appear “Preparing Filesystem” message. Finally it will have Cydia on your device home screen.
"PPjailbreak 1" is the only tool for Mac users to jailbreak iOS 8.0 to iOS 8.1.2. This jailbreak method is 100% same to TaiG 2 Jailbreak on Windows; They offer "PP helper" app instead to "3K assistant". Do not follow "PP helper" if you are not a Chinese user.
Download the PPjailbreak 1 version from above download links.
Before commence PP 1 jailbreak must be fulfilled below important points.
Device data should be backup to prevent unnecessary issues.
Turn off all Passcode and Touch ID facility.
Turn on the Airplane mode feature.
Connect specific Device to Mac Computer with USB cable.
step 01 : Download PP Jailbreak 1 Dmg file and open the file with double click and mount the volume. Now you have drag and drop PP file to Application folder.
step 02 : Once copied all files go launch pad and you should see PP 1 icon well placed. Again make double click and open the file.
step 03 : Now you can see main screen of the PP 1 tool.
step 04 : On the main screen, there is small check box left corner and should uncheck it to prevent unnecessary Chinese third party app store installations.
step 05 : Click jailbreak button middle of the screen appearing.
step 06 : Click the right corner button on the next screen.
step 07 : Now PP 1 jailbreak will be commence.
step 08 : Once PP 1 jailbreak complete, you can see green color check mark appears on PP main screen.
step 09 : Close the PP 1 application and you should experience Device reboots.
step 10 : Now you will have error message and ignore it and swipe slide to unlock.
step 11 : Check Homescreen for Cydia third party app store.
PPjailbreak Fail - You must have a clean installation of iOS 8.4 to skip this error. Please backup your device with iTunes and restore your device to iOS 8.4 again. Then jailbreak your device, After the Jailbreak process you can backup your device again.