The famous tweak developer & hacker, Coolstar is the developer of the Electra. According to the priority, we have listed official Electra jailbreak supports as follows.
1) Electra for iOS 11.4 jailbreak - Changelog 1.0.3 added support to Jailbreak iOS 11.4 beta 1 to beta 3. You can use Electra online method or PC required method to install Cydia. beta 1 to beta 3. You can use
3) ElectraTV for tvOS 11.2 to tvOS 11.3 jailbreak - It is possible to jailbreak tvOS 11.2 to tvOS 11.3 with same Electra 1131 jailbreak.
However, you cannot jailbreak iOS 12 or a href="https://m.pangu8.com/jailbreak/11.4.1/">iOS 11.4.1 with Electra jailbreak yet.
Electra 1131 added support to jailbreak iOS 11.4 beta 1, 2 and 3 versions, because of Apple still signing these three betas on iPhone 7, iPhone 7 plus, iPhone 8, iPhone 8 plus and iPhone X. You can delete iOS 11.4 OTA update by downgrading to iOS 11.4 b3. Use following any guide to complete Electra jailbreak 11.4 on your iOS 11.4 devices.
Step 01 - You must downgrade your device iOS version to iOS 11.4 beta first. Use below links to downgrade.
Step 02 - Tap the below Electra download button from your device safari browser. Then it will install Electra app directly to your device.
Step 03 - Run the installed Electra app on your device. Start the jailbreak process by tapping Jailbreak button.
Step 04 - Finally, Cydia will be available on your iOS 11.4 b3 device homescreen after the jailbreak process.
Step 01 - Downgrade iOS 11.4 beta firmware using iTunes first. Use below IPSW links to complete the downgrade.
Step 02 - Download the Cydia Impactor and the Electra1131 IPA to your device using below links.
Step 03 - Run the Cydia Impactor and drag the Electra1131 IPA into it. Make sure to connect your device with the computer.
Step 04 - Provide your Apple ID Email and the Password in this step.
Step 05 - Download and install following ByeByeUpdates to complete the jailbreak successfully with tapping allow > install > device passcode > install > install > restore the device.
Step 06 - Disable Siri, Disable Passcode and keep your device AirPlane mode now.
Step 07 - Run the Electra app on your device. Restart your device for several times, before start the jailbreak as trick. Then click on the jailbreak button. Then wait for few seconds.
Step 08 - Finally Cydia will be added on your iOS 11.4 b3 device homescreen.
Note: You can remove or uninstall Electra iOS 11.2 to iOS 11.3.1 jailbreak or unjailbreak Electra any time. Follow the guide to remove Electra.
CoolStar released Electra1131 IPA targeting iOS 11.3.1 to iOS 11.2 jailbreak. This Jailbreak based on a tfp0 exploit created by Ian Beer. Select any of method from following guides.
iOS 11.2, iOS 11.2.1, iOS 11.2.2, iOS 11.2.5 , iOS 11.2.6, iOS 11.3 , iOS 11.3.1
iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone SE, iPhone 5s
12.9-inch iPad Pro, 2nd generation 12.9-inch iPad Pro, 1st generation 10.5-inch iPad Pro, 9.7-inch iPad Pro, iPad Air 2, iPad Air, iPad 5th generation, iPad mini 4, iPad mini 3, iPad mini 2
iPod touch 6G
Now you can download Electra without PC. This is the easiest method.
Step 01 - Visit this page from your iOS 11.2 - iOS 11.3.1 device safari browser.
Step 02 - Just tap bellow Electra download button to get Electra app directly to your device.
Step 03 - Once complete the process you can find the Electra app from your device homescreen.
Step 04 - Run Electra app from your iPhone or iPad.
Step 05 - Click on the jailbreak button. It will take a few seconds to complete the jailbreak process.
Step 06 - Once done, Cydia icon will be available on your iOS 11.3 - iOS 11.2 iPhone / iPad.
You can jailbreak your iOS 11.3.1 to iOS 11.2 running iPhone or iPad using Electra Computer method. You must use Mac or Windows pc to complete this process.
Step 01 - Download the Electra .ipa file and place it on your desktop.
Step 02 - Download Cydia impactor on your Windows/Mac PC.
Step 03 - Connect your device to the PC and open the Cydia Impactor.
Step 04 - Drag and drop the Electra IPA onto Cydia Impactor. You need to provide your Apple ID and Password to sideload the IPA to your device.
Step 05 - Once completed the process, Electra app will be available on your device homescreen.
Step 06 - Now go to Settings > General > Profile and trust the app.
Step 07 - Then run Electra app from your device and tap the jailbreak button
Step 08 - It will take few seconds and finally, Cydia will appear on your iOS 11.3.1 device.
Note - Cydia update for iOS 11 by Saurik is still pending. Therefore Cydia is not fully functional yet. However, you can install jailbreak apps to your iOS 11.3.1 devices using Electra jailbreak & Electralyzed Deb Installer method.
Electra1131 1.0.4 Changelog supports to jailbreak tvOS 11.2, tvOS 11.2.1, tvOS 11.2.5, tvOS 11.2.6 and tvOS 11.3 devices. Electra team has given thanks to Justin Williams@Jaywalker and kb@nitotv for the supporting.
ElectraTV jailbreak is compatible 4th Generation and 5th Generation Apple TVs. Click here to get the ElectraTV Jailbreak for tvOS 11.2 to tvOS 11.3 guide.
Jailbreak iOS 11 to iOS 11.1.2 with Electra Online method is the easiest way to install Electra on your device and this is NO PC method. You must have to install zJailbreak app store or Xabsi app store to install Electra.
Version Compatibility : - iOS 11.1.2 , iOS 11.1.1, iOS 11.1, iOS 11.0.3, iOS 11.0.2, iOS 11.0.1, iOS 11
Device Compatibility : - iPhone X, iPhone 8/8 Plus, iPhone 7/7 Plus, iPhone SE, iPhone 6S/6S Plus, iPhone 6/6 Plus, iPhone 5S
iPad 5(2017), iPad Pro 12.9 (1st & 2nd generation), iPad Pro 9.7, iPad Pro, iPad Air 2, iPad Air, iPad Mini 4, iPad Mini 3, iPad Mini 2
iPod Touch 6
Step 01 - First you need to Install the zJailbreak or Xabsi from below download links. You need to provide your device passcode.
Step 02 - Open the Pigsy Online JB app. Tap on Electra Jailbreak.
Step 03 - Tap on install. Now Electra app will be installed on your device.
Step 04 - Launch Electra app from your device homescreen.
Step 05 - Tap on jailbreak button.
Step 06 - Once complete the process, you can find Cydia on your device homescreen.
You should have MAC or Windows computer to complete this process.
Step 01 - Download the Electra.IPA from the following button.
Step 02 - Download the Cydia Impactor version according to your computer.
Step 03 - Connect your device to the computer. Launch Cydia Impactor from your computer. Drag and Drop Electra IPA into the Cydia impactor.
Step 04 - You need to provide your Apple ID and password. Now it's beginning to sideload Electra.IPA to your device.
Step 05 - Once complete the process, Electra Jailbreak app will be available on your device homescreen.
Step 06 - Before launching the app, you need to verify the developer profile. Go to the Settings → General and Profile and Device management → Trust.
Step 07 - Now Launch the Electra app from your device. Tap the Jailbreak button to start the process. Then tap Continue Jailbreak from popup message.
Step 08 - It will take few minutes, Once complete the jailbreak process, your device will reboot and Cydia icon will be available on your device home screen.
Note - Electra jailbreak is semi-tethered. So you have to re-jailbreak the device after every reboot.
Still, most of packages/sources need to be updated for iOS 11 & higher version even Cydia update also pending by saurik. Until then you can install Jailbreak themes/ tweaks themes from following method.
1) Electralyzed Deb Installer - This will allow you to install Jailbreak tweaks/themes remotely your iOS 11 to iOS 11.1.2 running device. Also, you can uninstall themes/tweaks using Electralyzed Deb Installer very easily. You just need to run Electralyzed Deb Installer from your Windows or MAC PC.
Click here to get Electralyzed Deb installer to your Windows or MAC PC.
2) Anemone+FilzaJailed app+Zip app Method - You can use the Electra Jailbreak/Anemone, FilzaJailed app and Zip app Free together to install jailbreak features for iOS 11 to iOS 11.1.2 versions. If you need to add Jailbreak features with Electra Jailbreak, you must have installed to the FilzaJailed app and Zip app Free. (Now Anemone has added to the Big Boss repo)
You can install FilzaJailed from filzajailed.com according to instructions. Also, you can install FilzaJailed from the zJailbreak app store.
Zip App Free is a default iOS app. You can download it from App Store for free. Click here to download Zip App Free.
Step 01 - Run Electralyzed Deb Installer from your PC.
Step 02 - Enter Device IP Address ---> password : alpine ----> connect. (You need to enter connected device Wi-Fi IP address. Go to Settings > Wi-Fi > Tap Connected Wi-Fi > IP Address)
Step 03 - Then you will redirect to the deb installer screen.
Step 04 - Select your DEB file which you want to install and click Install. (Click here to download DEB files)
Step 05 - Check your device. You have successfully installed the file on your device.
Note - You can follow the above same method to uninstall the themes/tweaks.
Step 01 - Visit this page from your device Safari browser. Select a theme and tap the link.
Step 02 - You will be redirected to the following page and Tap the "Open in ZipApp Free."
Step 03 - It will be downloaded to the "Imported Files" folder. Then You can extract the zip file using "Open in ZipApp Free."
Step 04 - Open the extracted folder. There will be another folder or collection of folders.
Step 05 - Now quit from "Open in ZipApp Free" and Open the FilzaJailed app.
Step 06 - Go to Favorite (Star mark on below) ---> App Manager ---> ZipApp Free.
Step 07 - Then Tap the ZipApp Free ---> Documents → Imported Files. It has extracted theme folder.
Step 08 - Open the Extracted theme folder and Copy all the folders inside of it. Go back to the root folder, Open Library, Themes and paste the copied themes folder into it.
Step 09 - Now Open the Anemone. If you have already open Anemone, clear the cache and open again. Otherwise, restart your device.
Now you can find the themes of Anemone. Now you can apply the themes to your Jailbroken iOS 11 to iOS 11.1.2 devices.
Step 01 - Download the Dark Messages Pangu8 zip file. Extract it using the ZipApp Free as the above guide.
Step 02 - Open FilzaJailed. Go to Favorite (Star mark on below) ---> App Manager ---> ZipApp Free ---> Documents ---> Imported Files ---> Pangu8.
Step 03 - There are available DarkMessagesSetting.plist file & two folders as folder 1 , DarkMessages.bundle. Now open Folder 1 and copy all four files.
Step 04 - Back to the root folder. Then open Bootstrap --> Library -- SB Inject. Paste the files to here.
Step 05 - Step 05 - Then copy the DarkMessagesSetting.plist to the following path.
Bootstrap ---> Library ---> Preferenceloader ---> Preferences.Then paste here.
Step 06 - Copy the DarkMessages.bundle folder to the following path.
Bootstrap --> Library -- Preference Bundles.Now paste the DarkMessages bundle folder to here.
Step 07 - Restart your device. Now you can active dark messages on your settings.
Step 01 - Download the FluidEnabler from Pangu8 zip file. Extract it using the ZipApp Free.
Step 02 - Open FilzaJailed and Go to App Manager by Clicking the down below Star mark.
Step 03 - Go to ZipApp Free → Documents → Imported Files → Pangu8FluidEnabler → usr directory SB inject. Click edit to Select the both files and Copy them.
Step 04 - Now go back to the root folder. Open the usr directory → Lib → SB Inject and paste the copied files here. (You may need to try several times to paste these.)
Step 05 - Once Paste just reboot your device and Run Electra jailbreak app again.
There is a lot of scam Jailbreak video you can find in the web sources. We just found few sites as follows. Don’t get mess with these scam sites. Always use trusted sources to get correct details.
Currently Electra support up to iOS 11.3.1 versions only. Above site shows Electra availability according to Device’s iOS version. It shows Electra compatibility as iOS 11.0 - iOS 11.X.X. But, it has no ability to use Electra for iOS 11.4.1 & iOS 11.4 versions yet. Completely scam site.
Another Electra scam site. It shows Electra compatibility as iOS 11.2 to iOS 12 versions. But it cannot use Electra for iOS 12 jailbreak yet. Also, latest Electra 1131 IPA does not support to jailbreak iOS 11.4.1 and iOS 11.4 versions too. The site allows to download extracted folder only. They have published a fake video guide to install Cydia too. However nothing will be installed.
Coolstar introduced the uninstall bash script. This script completely removes everything of this application including Anemone and associated themes without restoring your iDevice.
Same delectra method can be used to uninstall Electra 1131 jailbreak running on iOS 11.2 to iOS 11.3.1 devices as well as Electra 1121 jailbreak running on iOS 11 to iOS 11.1.2 devices.
Here is the easy step guide to remove Electra without a computer.
Step 01 - Install the iTerminal app from the official App Store.
Step 02 - Open the iTerminal. Tap on a SSH to set up a connection using the following details.
Nickname: Type Anything you want--> Host Name:Enter your Wifi IP Address--> Port: 2222--> User Name: root--> Password: alpin --> Done.
Step 03 - Then tap on connect to enter the terminal.
Step 04 - Type the following command.
Then tap return.
Step 05 - You will get the screen to execute. Again tap on return.
Step 06 - It will take some time and your device will pause for few seconds. Finally, it will reboot and removes everything associated with the toolkit. Further, you can just delete app icons too.